ISL1904DEMO1Z

Offline Triac Dimmable Isolated LED Driver Demonstration Board

Description

The ISL1904DEMO1Z demo board converts a high line AC input voltage to a 18V, 700mA DC output. It is implemented with Intersil’s critical conduction mode (CrCM) LED driver controller, the ISL1904. It demonstrates the fundamental functions of ISL1904, including soft-start, dimming, over-voltage protection, short circuit protection, etc.

The circuit operates in CrCM with variable frequency and allows near zero-voltage switching (ZVS). Typical efficiency is about 81% at full load. The ISL1904DEMO1Z demo board supports phase dimming and is compatible with wide variety of leading and trailing edge dimmers available in the market. This application note covers the performance data, critical waveforms, extensive dimming data, schematics, layout and bill of materials.

Key Features

  • Input voltage VIN: 176V to 264V
  • Output voltage VO: 12V to 20V
  • Output current IO: 700mA (14W)
  • Board dimensions: 68×26×15mm3 (L×W×H)
  • Input power factor greater than 0.93 at nominal
  • Total harmonic distortion less than 7% at nominal
  • Peak efficiency at full load: 81%
  • 0-100% flicker free dimming with leading and trailing edge dimmers

Applications

  • Industrial and commercial LED lighting
  • Retrofit LED lamps with triac dimming
  • Universal AC mains input LED retrofit lamps
  • AC or DC Input LED ballasts

ISL1904DEMO1Z Offline Triac Dimmable Isolated LED Driver Top of Demonstration Board

ISL1904DEMO1Z Offline Triac Dimmable Isolated LED Driver Top of Demonstration Board

ISL1904DEMO1Z Offline Triac Dimmable Isolated LED Driver Bottom of Demonstration Board

ISL1904DEMO1Z Offline Triac Dimmable Isolated LED Driver Bottom of Demonstration Board

Related Products

ISL1904

可订购工具信息

无结果数据

No product that matches the specified status or spec was found.
Please contact Renesas Electronics support