ISL97701

Boost Regulator with Integrated Schottky and Input Disconnect Switch

Product Status: Mass Production

OVERVIEW

The ISL97701 represents a high efficiency boost converter with integrated boost FET, boost diode and input disconnect FET.

With an input voltage of 2.3V to 5.5V the ISL97701 has an output capability of up to 50mA at 18V using integrated 500mA switches. Efficiencies are up to 87%. The integrated protection FET is used to disconnect the boost inductor from the input supply whenever an output fault condition is detected, or when the device is disabled. This gives 0 output current in the disabled mode, compared to standard boost converters where current can still flow when the device is disabled.

The ISL97701 comes in the 10 Ld 3x3 DFN package and is specified for operation over the -40°C to +85°C temperature range.

KEY FEATURES

  • Up to 87% efficiency
  • 2.3V to 5.5V input
  • Up to 28V output
  • 50mA at 18V
  • Integrated boost Schottky diode
  • Input voltage disconnect switch
  • Synchronization input
  • Chip enable
  • 10 Ld 3x3 DFN package
  • Pb-free (RoHS compliant)

BLOCK DIAGRAM

 Block Diagram

PARAMETRICS

Parameters
ISL97701
Basic Information
生产状态
Mass Production
输出数量
1
拓扑 [Rail 1]
Boost
输入电压最小值 (V) [Rail 1]
2.3
输入电压最大值 (V) [Rail 1]
5.5
输出电压最小值 (V) [Rail 1]
4.3
输出电压最大值 (V) [Rail 1]
28
输出电流最大值 (A) [Rail 1]
0.05
IQ [Rail 1]
900 µA
开关频率 (最大值) (MHz)
1.1
开关频率 (最小值) (MHz)
0.9
最大占空比 (%)
-
资质级别
Standard
峰值效率 (%)
87
POR
Yes
SYNCH功能
Yes
开关频率范围 (MHz)
0.9 to 1.1 MHz
温度范围
-40 to +85

设计资源与工具

Selection Tool

 PowerCompass Online Tool

The PowerCompass™ tool helps you find Renesas parts that match your requirements, performs system analysis & more.

Design

Design Tool

 PowerNavigator Software

Configure and monitor digital-DC devices. Easily change features and functions of your power supply design with a simple GUI.

Design

Simulation Tool

iSim Online Designer

Select supporting components, build your schematic and validate your power management and op amp designs.

Simulate

Cross Reference

Intersil Cross Reference

Cross-reference based on data from industry sources. Support for the online tool has been discontinued, but the data is still available.

Download

Knowledge Base

Switching Regulators FAQs

Find answers to common questions, support articles and development hints.


FAQs

相关评估板与套件

Action Needed