ISL97536

Monolithic 1A Step-Down Regulator with Low Quiescent Current

Product Status: Mass Production

OVERVIEW

The ISL97536 is a synchronous, integrated FET 1A step-down regulator with internal compensation. It operates with an input voltage range from 2.5V to 6V, which accommodates supplies of 3.3V, 5V, or a Li-ion battery source. The output can be externally set from 0.8V to VIN with a resistive divider.

The ISL97536 features PWM control with a 1.4MHz typical switching frequency. The typical no load quiescent current is only 500µA. Additional features include a 100ms Power-On- Reset output, <1µA shutdown current, short-circuit protection, and over-temperature protection.

The ISL97536 is available in the 10 Ld MSOP package, making the entire converter occupy less than 0.15in2 of PCB area with components on one side only. The 10 Ld MSOP package is specified for operation over the full -40°C to +85°C temperature range.

KEY FEATURES

  • Less than 0.15in2 footprint for the complete 1A converter
  • Components on one side of PCB
  • Max height 1.1mm MSOP10
  • 100ms Power-On-Reset output (POR)
  • Internally-compensated voltage mode controller
  • Up to 95% efficiency
  • <1µA shutdown current
  • 500µA quiescent current
  • Hiccup mode overcurrent and over-temperature protection
  • Pb-free (RoHS compliant)

BLOCK DIAGRAM

 Block Diagram

PARAMETRICS

Parameters
ISL97536
Basic Information
生产状态
Mass Production
输出数量
1
拓扑 [Rail 1]
Buck
输入电压最小值 (V) [Rail 1]
2.5
输入电压最大值 (V) [Rail 1]
6
输出电压最小值 (V) [Rail 1]
0.8
输出电压最大值 (V) [Rail 1]
6
输出电流最大值 (A) [Rail 1]
1
IQ [Rail 1]
0.5 mA
开关频率 (最大值) (MHz)
1.4
开关频率 (最小值) (MHz)
1.4
最大占空比 (%)
See Datasheet
资质级别
Standard
峰值效率 (%)
95
POR
Yes
BOM总占用面积 (mm2)
96.8
SYNCH功能
No
控制类型
Voltage Mode
开关频率范围 (MHz)
1.4
CAN 采样
YES
温度范围
-40 to +85

设计资源与工具

Selection Tool

 PowerCompass Online Tool

The PowerCompass™ tool helps you find Renesas parts that match your requirements, performs system analysis & more.

Design

Design Tool

 PowerNavigator Software

Configure and monitor digital-DC devices. Easily change features and functions of your power supply design with a simple GUI.

Design

Simulation Tool

iSim Online Designer

Select supporting components, build your schematic and validate your power management and op amp designs.

Simulate

Cross Reference

Intersil Cross Reference

Cross-reference based on data from industry sources. Support for the online tool has been discontinued, but the data is still available.

Download

Knowledge Base

Switching Regulators FAQs

Find answers to common questions, support articles and development hints.


FAQs

相关评估板与套件

Action Needed