ISL9113A

Low Input Voltage and High Efficiency Synchronous Boost Converter with 1.3A Switch

Product Status: Mass Production

OVERVIEW

The ISL9113A provides a power supply solution for devices powered by three-cell alkaline, NiCd, NiMH, or one-cell Li-Ion/Li-Polymer batteries. It offers either a fixed 5V or an adjustable output option for USB-OTG or portable HDMI applications. The device is guaranteed to supply 500mA from a 3V input and 5V output, and has a typical 1.3A peak current limit. High 1.8MHz switching frequency allows for the use of tiny, low-profile inductors, and ceramic capacitors to minimize the size of the overall solution.

The ISL9113A is an internally compensated, fully integrated synchronous converter optimized for efficiency with minimal external components. At light load, the device enters Skip mode and consumes only 20μA of quiescent current, resulting in higher efficiency at light loads and maximum battery life.

The device is available in an 8 Ld DFN package.

KEY FEATURES

  • Up to 95% efficiency at typical operating conditions
  • Input voltage range: 0.8V to 4.7V
  • Output current: Up to 500mA (VBAT = 3.0V, VOUT = 5.0V)
  • Low quiescent current: 20μA (typical)
  • Logic control shutdown (IQ < 1μA)
  • 1.2V EN high logic
  • Output disconnect during shutdown
  • Skip mode under light-load condition
  • Undervoltage lockout
  • Fault protection: OVP, OTP, short-circuit
  • 8 Ld 2mmx2mm DFN Package

BLOCK DIAGRAM

 Block Diagram

PARAMETRICS

Parameters
ISL9113A
Basic Information
生产状态
Mass Production
拓扑
Boost
输出数量
1
输入电压最小值 (V)
0.8
输入电压最大值 (V)
4.7
输出电压最小值 (V)
1
输出电压最大值 (V)
5.2
输出电流最大值 (A)
0.5
IQ
20 µA
开关频率 (最大值) (MHz)
2
开关频率 (最小值) (MHz)
1.5
最大占空比 (%)
-
资质级别
Standard
峰值效率 (%)
95
POR
No
BOM总占用面积 (mm2)
4
SYNCH功能
No
控制类型
Current Mode
开关频率范围 (MHz)
1.5 to 2.0 MHz
CAN 采样
YES
温度范围
-40 to +85

Action Needed