ISL8126

Dual/n-Phase Buck PWM Controller with Integrated Drivers

Product Status: Mass Production

OVERVIEW

The ISL8126 integrates two voltage-mode PWM leading-edge modulation control with input feed-forward synchronous buck PWM controllers to control dual independent voltage regulators or a 2-phase single output regulator. It also integrates current sharing control for the power module to operate in parallel, which offers high system flexibility.

The ISL8126 integrates an internal linear regulator, which generates IC’s bias voltages for applications with only one single supply rail. The internal oscillator is adjustable from 150kHz to 1.5MHz, and is able to synchronize to an external clock signal for frequency synchronization and phase paralleling applications. Its PLL circuit can output a phase-shift-programmable clock signal for the system to be expanded to 3-, 4-, 6- and 12- phases with desired interleaving phase shift.

The ISL8126’s Fault Spreading feature protects any channel from overloading/stressing due to system faults or phase failure. The undervoltage fault protection features are also designed to prevent a negative transient on the output voltage during falling down. This eliminates the Schottky diode that is used in some systems for protecting the load device from reversed output voltage damage.

KEY FEATURES

  • Wide VIN range operation: 3V to 26.5V
  • VCC operation from 3V to 5.60V
  • Excellent output voltage regulation: 0.6V internal reference
  • Frequency synchronization with programmable phase delay up to 12-phase applications
  • Fault spreading capability for high system reliability
  • Digital soft-start with precharged output start-up capability
  • Dual independent channel enable inputs with precision voltage monitor and voltage feed-forward capability
  • Programmable input voltage POR and its hysteresis with a resistor divider at EN input
  • Extensive circuit protection functions: output overvoltage, undervoltage, overcurrent protection, over-temperature and pre-power-on-reset overvoltage protection option

BLOCK DIAGRAM

 Block Diagram

PARAMETRICS

Parameters
ISL8126
Basic Information
生产状态
Mass Production
最大输出数
2
最大相位数
2
输入电压最小值 (V)
3
输入电压最大值 (V)
26.5
输出电压最小值 (V)
0.6
输出电压最大值 (V)
23.85
输出电流最大值 (A)
60
偏置电压范围 (V)
2.97 to 5.60
VID
No VID
参数应用
Power Supply for Datacom/Telecom and POL | Paralleling Power Module | Wide and Narrow Input Voltage Range Buck Regulators
资质级别
Standard
下降
Yes
集成MOSFET驱动器
Yes
CAN 采样
YES
温度范围
-40 to +85

Action Needed