ISL9008A

Low Noise LDO with Low IQ , High PSRR

Product Status: Mass Production

OVERVIEW

ISL9008A is a high performance single low noise, high PSRR LDO that delivers a continuous 150mA of load current. It has a low standby current and is stable with 1µF of MLCC output capacitance with an ESR of up to 200mΩ.

The ISL9008A has a high PSRR of 65dB and output noise less than 45µVRMS . When coupled with a no load quiescent current of 46µA (typical), and 0.5µA shutdown current, the ISL9008A is an ideal choice for portable wireless equipment.

The ISL9008A comes in several fixed voltage options with ±1.8% output voltage accuracy over-temperature, line and load. Other output voltage options may be available upon request.

KEY FEATURES

  • High performance LDO with 150mA continuous output
  • Excellent transient response to large current steps
  • Excellent load regulation: <0.1% voltage change across full range of load current
  • High PSRR: 65dB @ 1kHz
  • Wide input voltage capability: 2.3V to 6.5V
  • Very low quiescent current: 46µA
  • Low dropout voltage: typically 200mV @ 150mA
  • Low output noise: typically 45µVRMS @ 100µA (1.5V)
  • Stable with 1µF to 4.7µF ceramic capacitors
  • Shutdown pin turns off LDO with 1µA (max) standby current
  • Soft-start limits input current surge during enable
  • Current limit and overheat protection
  • ±1.8% accuracy over all operating conditions
  • 5 Ld SC-70 package or 6 Ld µTDFN package
  • -40°C to +85°C operating temperature range
  • Pb-free (RoHS compliant)

BLOCK DIAGRAM

 Block Diagram

PARAMETRICS

Parameters
ISL9008A
Basic Information
生产状态
Mass Production
输入电压最小值 (V)
2.3
输入电压最大值 (V)
6.5
外部偏置
No
输出电压最小值 (V)
1.5
输出电压最大值 (V)
3.3
固定输出电压选项
Yes
O/P电压精度 (%)
±1.8
输出电流1最大值 (A)
0.15
PSRR (dB)
65
资质级别
Standard
噪声 (μVRMS 10Hz至100kHz)
45
IQ
45 µA
压降典型值 (mV)
200 @150mA
启用/关闭
Yes
POR数量
N/A
PGOOD输出
No
输入电压范围 (V)
2.3 to 6.5
输出电压范围 (V)
1.5 to 3.3
CAN 采样
YES
温度范围
-40 to +85

Action Needed