ISL88731

SMBus Level 2 Battery Charger

Product Status: Mass Production

OVERVIEW

The ISL88731 is a highly integrated Lithium-ion battery charger controller, programmable over the SMBus system management bus (SMBus). The ISL88731 is intended to be used in a smart battery charger (SBC) within a smart battery system (SBS) that throttles the charge power such that the current from the AC-adapter is automatically limited. High efficiency is achieved with a DC/DC synchronous-rectifier buck converter, equipped with diode emulation for enhanced light load efficiency and system bus boosting prevention. The ISL88731 charges one to four Lithium-ion series cells, and delivers up to 8A charge current. Integrated MOSFET drivers and bootstrap diode result in fewer components and smaller implementation area. Low offset current-sense amplifiers provide high accuracy with 10mΩ sense resistors. The ISL88731 provides 0.5% end-of-charge battery voltage accuracy.

The ISL88731 provides a digital output that indicates the presence of the AC adapter as well as an analog output which indicates the adapter current within 4% accuracy.

The ISL88731 is available in a small 5mmx5mm 28 Ld Thin (0.8mm) QFN package. An evaluation kit is available to reduce design time. The ISL88731 is available in Pb-Free packages.

KEY FEATURES

  • 0.5% Battery Voltage Accuracy
  • 3% Adapter Current Limit Accuracy
  • 3% Charge Current Accuracy
  • SMBus 2-Wire Serial Interface
  • Battery Short Circuit Protection
  • Fast Response for Pulse-Charging
  • Fast System-Load Transient Response
  • Monitor Outputs
  • Adapter Current (3% Accuracy)
  • AC-Adapter Detection
  • 11-Bit Battery Voltage Setting
  • 6 Bit Charge Current/Adapter Current Setting
  • 8A Maximum Battery Charger Current
  • 11A Maximum Adapter Current
  • +8V to +28V Adapter Voltage Range
  • Pb-Free (RoHS Compliant)

BLOCK DIAGRAM

 Block Diagram

PARAMETRICS

Parameters
ISL88731
Basic Information
生产状态
Mass Production
输入电压最小值 (V)
7
输入电压最大值 (V)
25
输入限流精度 (%)
±3
电池充电电压 (V)
2.7 to 19.2 in 16mV Steps
充电电压精度最大值 (%)
±0.5
电池充电电压调节 (%)
16mV steps
充电限流精度 (%)
±3
涓流充电限流精度 (%)
64mA to 220mA
自动涓流充电典型值 (V)
2.7
电池泄漏电流最大值 (μA)
2 (DCIN=0V, No System Load)
自动电源选择
No (Set by Host)
直流适配器检测
No (Set by Host)
拓扑
Fixed Frequency Synchronous Buck
开关频率典型值 (kHz)
400
最大占空比 (%)
99.9
听觉噪音
No
热关断 (°C)
150 °C
电池化学物品
Multi-Cell Li+/Polymer
资质级别
Standard
输入电压范围 (V)
7 to 25
CAN 采样
YES
温度范围
-10 to +100

Action Needed