ISL9220A

Switching Charger for 1-Cell and 2-Cell Li-ion Batteries

OVERVIEW

The ISL9220, ISL9220A is a cost-effective and versatile battery charger for 1-cell and
2-cell Li-ion and Li-Polymer based portable applications.

The device features synchronous PWM technology, maximizing power efficiency, thus minimizing charge time and heat. The 1.2MHz switching frequency allows use of small external inductors and capacitors.

A simple charge current programming method is provided. External resistors program the fast charge and end-of-charge currents.

The two status outputs can be used to drive LEDs, or can be connected to host processor.

A programmable charge timer provides the ability to detect defective batteries, and provides a secondary method of detecting charge termination.

A thermistor interface is provided for battery presence detection, and for temperature qualified charging conditions.

Additional features include preconditioning of an over-discharged battery, automatic recharge, and thermally enhanced QFN package.

KEY FEATURES

  • Highly Integrated Battery Charger IC
  • Charges 1- and 2-Cell Li-ion or Li-Polymer Batteries
  • Up to 2A Charge Current
  • Synchronous Buck Topology with Integrated Power FETs
  • 1.2MHz Switching Frequency
  • 0.5% Charge Voltage Accuracy
  • Programmable Input Current Limit with One External Resistor
  • Thermistor Interface for Battery Detection and Temperature Qualified Charging
  • Two Status Outputs
  • Programmable Charge Safety Timer
  • Short-Circuit and Thermal Protection
  • Small 4mmx4mm TQFN Package
  • -40°C to +85°C Operating Temperature Range

PARAMETRICS

Parameters
ISL9220A
Basic Information
生产状态
Mass Production
输出电压典型值 (V)
4.2
电压精度 (%)
0.5
VIN1 (最大值) (V)
18
输出电流1最大值 (A)
2
安全定时器
Yes
自终止
Yes
接受CC适配器
No
VIN1涓流充电 (最小值) (% CC)
10
热调节
Yes
功能
Enable, Charge Status, Fault
电池化学物品
Single Cell Li+/Polymer
资质级别
Standard
CAN 采样
YES
温度范围
-40 to +85

Confirm below disclaimers

Input Renesas account name and password