Microcontroller for motor control incorporating a multifunctional timer, high-speed 12-bit A/D converter,
and 10-bit A/D converter
The RX62T Group of high-performance microcontrollers with a maximum operating frequency of 100MHz are designed for motor control. They are equipped with multifunction timers (MTU, GPT), high-speed 12-bit A/D converter, and 10-bit A/D converter for facilitating motor control. The products also incorporate many safety features to comply with the IEC60730 safety standard for home appliances. In addition to a maximum of 256KB flash and 16KB RAM on-chip memory, they have a maximum of 32KB of on-chip flash memory for data storage. 64-pin to 112-pin packages are available.
|CPU core||RX CPU
|Maximum operating frequency||100MHz|
|Power supply voltage||4.0 to 5.5V, 2.7 to 3.6V (analog voltage 3.0 to 3.6V, 4.0 to 5.5.V)|
|Floating-point processing unit||Single-precision floating-point processing unit
(Supports add/subtract/compare/multiply/divide and other instructions)
|On-chip peripheral functions||
|On-chip debugging function||Yes (with trace function)|
|Low power consumption modes||4 modes
|Packages||PLQP0064KB-A (64-pin LFQFP, 10 x 10mm, 0.5mm pitch)
PLQP0064GA-A (64-pin LQFP, 14 x 14mm, 0.8mm pitch)
PLQP0080JA-A (80-pin LQFP, 14 x 14mm, 0.65mm pitch)
PLQP0100KB-A (100-pin LFQFP, 14 x 14mm, 0.5mm pitch)
PLQP0112JA-A (112-pin LQFP, 20 x 20mm, 0.65mm pitch)
Software Design Support
|CS+||An integrated development environment that can be used for coding, assembling/compiling, and simulation. (Also included with Renesas Starter Kits.)|
|e2 studio||Renesas eclipse embedded studio, known as e² studio, is a complete development and debug environment based on the popular Eclipse CDT project.|
|E1||A standard Renesas on-chip debugging emulator that enables users to carry out ample debugging for real development at low cost. (Also included with starter kits.)|
|Renesas Starter Kit||All the development tools you need for MCU evaluation and getting started. Also recommended for training.|
Hardware Design Support
|IBIS/BSDL||IBIS standard simulation data is required for high-speed board design and can be used to run simulations to examine and troubleshoot issues such as waveform reflection, ringing, and so on, before producing the actual board.
BSDL is a data input format supported by most IEEE 1149.1 (JTAG)-compliant tools. The automatic test pattern generation (ATPG) and automatic test equipment functions of these tools facilitate testing.
|Resonator Information||Please search for your resonator on its manufacturer's site linked below. If you require optimal oscillation circuit constants for your particular system, please ask the manufacturer of the oscillator.
For main clock resonators :
KYOCERA: Click here for RX62T oscillation evaluation result.
Murata Manufacturing: For IC Manufacturer, select Renesas Electronics, and enter R5F562T into the IC Part Number search box.
The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.
Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.