X9119

1024 Tap, Low Power, 2-Wire Interface, Digitally Controlled (XDCP™) Potentiometer

Product Status: Mass Production

OVERVIEW

The X9119 integrates a single digitally controlled potentiometer (XDCP™) on a monolithic CMOS integrated circuit.

The digital controlled potentiometer is implemented using 1023 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the user through the 2-wire bus interface. The potentiometer has associated with it a volatile Wiper Counter Register (WCR) and four nonvolatile data registers that can be directly written to and read by the user. The contents of the WCR controls the position of the wiper on the resistor array through the switches. Power-up recalls the contents of the default data register (DR0) to the WCR.

The XDCP™ can be used as a 3-terminal potentiometer or as a 2-terminal variable resistor in a wide variety of applications including control, parameter adjustments and signal processing.

KEY FEATURES

  • 1024 resistor taps – 10-bit resolution
  • 2-Wire serial interface for write, read, and transfer operations of the potentiometer
  • Wiper resistance, 40Ω typical at VCC = 5V
  • Four nonvolatile data registers
  • Nonvolatile storage of multiple wiper positions
  • Power-on recall, loads saved wiper position on power-up.
  • Standby current <3μA maximum
  • VCC: 2.7V to 5.5V operation
  • 100kΩ end-to-end resistance
  • 100 yr. data retention
  • Endurance: 100,000 data changes per bit per register
  • 14 Ld TSSOP
  • Low power CMOS
  • Single supply version of the X9118
  • Pb-free (RoHS compliant)

BLOCK DIAGRAM

 Block Diagram

PARAMETRICS

Parameters
X9119
Basic Information
生产状态
Mass Production
器件/通道数量
1
抽头数量
1024
内存类型
Nonvolatile
总线/输出接口
2-Wire
阻抗选项 (kΩ)
100
供电电压Vcc (最小值) (V)
2.7
供电电压Vcc (最大值) (V)
5.5
供电电流Icc
3 µA
阻抗变化特性
Linear
VL最小终端电压
0 V
VL最大终端电压
5.5 V
Wiper电流 (mA)
3
Wiper电阻 (Ω)
40
双电源范围 (V)
N/A
最高工作温度
85 °C
端到端温度系数 (ppm/øC)
300
中点比率温度系数
20
资质级别
Standard
单电源范围 (V)
0 to 5.5
供电电压Vcc范围 (V)
2.7 to 5.5
CAN 采样
YES
温度范围
-40 to +85

Action Needed