ISL78310

High Performance 1A LDO

Product Status: Mass Production

OVERVIEW

The ISL78310 is a low dropout voltage, high-current, single output LDO specified for 1A output current. This part operates from input voltages down to 2.2V and up to 6V. The part offers fixed and external resistor adjustable output voltages from 0.8V to 5V. Custom voltage options are available upon request.

For applications that desire to set the in-rush current to less than the current limit of the part, or for applications that require turn-on time control, an external capacitor can be placed on the soft-start pin for maximum control. A supply-independent ENABLE signal allows the part to be placed into a low quiescent current shutdown mode. Sub-micron CMOS process is used for this product family to deliver best-in-class analog performance and overall value.

This CMOS LDO consumes significant lower quiescent (ground pin) current as a function of load over bipolar LDOs, which translates into higher efficiency and packages with smaller footprints. Quiescent current is optimized to achieve a very fast load transient response.

The ISL78310 is AEC-Q100 rated. The ISL78310 is rated for the automotive temperature range (-40°C to +125°C).

KEY FEATURES

  • 2.2V to 6V input supply
  • 130mV dropout voltage typical (at 1A)
  • Fast load transient response
  • ±0.2% initial VOUT accuracy
  • Adjustable in-rush current limiting
  • 58dB typical PSRR
  • 63µVRMS output noise at VOUT = 1.8V
  • Power-good feature
  • 500mV feedback voltage
  • Supply-independent 1V enable input threshold
  • Short-circuit current protection
  • 1A peak reverse current
  • Over-temperature shutdown
  • Any cap stable with minimum 10µF ceramic
  • ±1.8% guaranteed VOUT accuracy for junction temperature range from -40°C to +125°C
  • Available in a 10 Lead DFN package
  • Pb-free (RoHS compliant)
  • AEC-Q100 qualified

BLOCK DIAGRAM

 Block Diagram

PARAMETRICS

Parameters
ISL78310
Basic Information
生产状态
Mass Production
输入电压最小值 (V)
2.2
输入电压最大值 (V)
6
外部偏置
No
输出电压最小值 (V)
0.8
输出电压最大值 (V)
5
固定输出电压选项
Yes
O/P电压精度 (%)
±1.8
输出电流1最大值 (A)
1
PSRR (dB)
72
资质级别
Automotive
噪声 (μVRMS 10Hz至100kHz)
63
压降典型值 (mV)
130 @ 1A
启用/关闭
Yes
PGOOD输出
Yes
输入电压范围 (V)
2.2 to 6.0
输出电压范围 (V)
0.8 to 5.0
温度范围
-40 to +125

Action Needed