M3A-2145G50 (Discontinued product)

• Software and Tools
• Starter Kits and Platforms
• Starter-kits and Evaluation Boards
• M3A-2145G50
• E8a/E8 14PIN-10PIN Convert Board
• M3A-0032
• M3A-0033
• M3A-0037G01
• M3A-0038G01
• M3A-0039
• M3A-0040
• M3A-2142G03
• M3A-2152G52A
• M3A-2154G52B
• M3A-HS11G50
• M3A-HS19G50
• M3A-HS30G50
• M3A-HS37G50
• M3A-HS49G50
• M3A-HS62G50
• M3A-HS64G01
• M3A-HS64G02
• M3A-HS64G50
• M3A-HS71G50
• M3A-HS86G50
• M3A-HS87G50
• M3A-ZA53
• R0K572630D001BR
• R0K572670C000BR
• EV5-ASIA (R0K3306S0D011BR)
• EV10 (R0K3036S1DU01BR)
• EV5-US (R0K3306S0D010BR)
• SDK-PLC-EU-A (or -B for CENELEC B band)
• M3A-HS60G50
• EZ-0002
• EZ-0005
• EZ-0006
• EZ-0007
• EZ-0008
• EZ-0009
• EZ-0011
• EZ-0012
• EZ-BLST-003
• R0K5R8C34DK2HBR
• R0K5R8C34DK2PBR

• Overview
• Design Support
• Further Information

Flash Memory Reprogramming Kit by UART (M3A-2145G50) for M32R/ECU series

This product has been decided to discontinue selling.

The M3A-2145G50 connects the host PC's serial port to the M32R/ECU MCU serial I/O port on the evaluation board for starter kits and is a kit which realizes reprogramming control to the on-chip flash memory via direct UART communication with the flash reprogramming firmware which is stored in the M32R/ECU on-chip boot ROM. The M3S-UFLA32R is an on-chip flash memory reprogramming utility via UART communication and is built-in to the M3A-2145G50.

Combination with target MCU and target board

Target MCU	Starter kit
32170/32174 group MCU	M3A-2114G52, M3A-2114G52A
32171 group MCU	M3A-2114G62, M3A-2114G62A
32172/32173 group MCU	M3A-2114G72, M3A-2114G72A
32176 group MCU	M3A-2152G52, M3A-2152G52A
32180 group MCU	M3A-2142G52, M3A-2142G52A
32182 group MCU	M3A-2142G62, M3A-2142G62A
32185/32186 group MCU	M3A-2154G52B
32192/32195/32196 group MCU	M3A-2154G52B, M3A-2154G52A

The object for M3S-UFLA32R can be downloaded from following.
M3S-UFLA32R executable file (ZIP:3.59MB)