Japan English
M30850T-EPB (Discontinued product)
The following page content corresponds to the products marketed in Japan.
If you do not live in Japan, please
- Overview
- Documentation
- Design Support
M30850T-EPB has been discontinued. In case newly-adoped, take M30850T2-EPB instead of it.
Target Devices
- M16C Family M32C/80 Series M32C/80, M32C/84, M32C/85, M32C/86 Group
Overview
The emulation probe is user-replaceable MCU-dependent hardware tool for the
PC7501 emulator.
Connecting this emulation probe to a PC7501 emulator allows you to configure a
debugging environment for your target system.
Components
- MCU board for M32C/80, M32C/84, M32C/85 and M32C/86 Groups (M30850T-EPBM)
- Evaluation MCU * Already mounted
- Probe board for PC7501 (PCA7501EPBA)
- Converter board for connecting to 100-pin 0.65mm-pitch QFP (M30800T-PTC)
- 100-pin 0.65 mm-pitch IC socket (IC61-1004-051 made by Yamaichi Electronics Co., Ltd.)
- Oscillator circuit boards
Main clock for 32MHz (OSC-3)
Main clock (OSC-2) - User's Manual
Option
- M30850T-EPBM: Maintenance part for M30850T-EPB (MCU board for M32C/80, M32C/84, M32C/85 and M32C/86 Groups)
Specifications
| Applicable emulator | PC7501 | |
| Supported MCU (*1) | M32C/80, M32C/84(*2), M32C/85 and M32C/86 Groups | |
| Maximum operating clock frequency | 32MHz (at Vcc1=Vcc2=4.2 to 5.5V) 24MHz (at Vcc1=Vcc2=3.0 to 5.5V) |
|
| MCU mode supported | Single-chip mode, Memory expansion mode, Microprocessor mode | |
| Internal emulation memory (Built into PC7501) |
In single-chip mode |
|
| In memory expansion mode |
|
|
| In microprocessor mode |
|
|
| Target system voltage | 3.0 to 5.5V | |
| Power supply | Supplied from the emulator (DC) | |
*1. For debugging 144-pin MCU, M3T-FLX-144NSD (option) is required.
*2. When using this emulation probe, you cannot use the page mode control
function for a ROM-less version of M32C/84 Group.
Connection to Target System
