M306V8T-EPB (Discontinued product)

Target Devices

• M16C Family M16C/60 Series M16C/6V Group M306V8

Overview

The emulation probe is user-replaceable MCU-dependent hardware tool for the PC7501 emulator.
Connecting this emulation probe to a PC7501 emulator allows you to configure a debugging environment for your target system.

Components

• MCU board for M16C/6V Group M306V8 (M306V8T-EPB)
• Evaluation MCU * Already mounted
• Converter board for connecting to 116-pin 0.65mm-pitch LQFP (M306V8T-PTC)  * Installed
• Oscillator circuit boards
  Main clock for 16MHz (OSC-3)
  Main clock (OSC-2)
• Resistor arrays for pulling up ports P0 to P5 (51kΩ × 6)
• User's Manual

Specifications

Applicable emulator	PC7501
MCU supported	M16C/60 Series M16C/6V Group M306V8
Maximum operating clock frequency	16MHz (at Vcc1=Vcc2=3.15 to 3.45V)
MCU mode supported	Single-chip mode Memory expansion mode 16-bit bus width (Nomal mode, Memory expanson mode 2) Microprocessor mode 16-bit bus width (Nomal mode, Memory expanson mode 2)
Target system voltage	3.15 to 3.45V
ROM size	516KB
Emulation memory	(1)Access area: Flash ROM of MCU Max. operating frequency: 10 MHz (2)External area (CS3*-CS0* area) Possible to allocate up to 4 areas by 4 KB. Maximum operating frequency： Maximum operating frequency (at 3.3 V) 0 wait: 6 MHz 1--3 wait: 16MHz
Power supply	Supplied from included AC adapter (power supply voltage: 100--240 V, 50/60 Hz)

Connection to Target System