M38000TL2-FPD (Discontinued product)

M38000TL2-FPD has been discontinued. In case newly-adopted, take   M38000T2-CPE instead of it.

Target Devices

• 740 Family

Overview

This product is an emulation pod, which is a user-replaceable MCU-dependent hardware tool for the PC4701 emulator.
Connecting this emulation pod to a PC4701 emulator allows you to configure a debugging environment for your target system.

Notes

• M38000TL2-FPD cannot supply power to the user target. Prepare a separate power supply for the target.
• If M38000TL2-FPD connects to an emulator MCU (M3XXXXRFS) that has a flat package without a screw lock, a PCA4933 converter separately available from Renesas must be used.
• When using the M38049RLSS emulator MCU for the 3803/3804 group MCUs, you may need the problem-fixed board M38049T-CNV (free of charge). The M38049T-CNV comes with M38049RLSS shipped on and after September 1, 2004. For details, see the ToolNews.

Features

• Compact size realized by gate arrays
• Can operate with a low supply voltage (2.0 to 5.5V)*.

* Within MCU specifications

Components

• M38000TL2-FPD emulation pod
• M3T-28DP-WS (28-pin DIP type MCU probe header)
• M3T-32LCC-S (32-pin LCC type MCU probe header)
• Flexible cable for connecting target system (PCA7733)
• RESET, GND and Vcc cables with overcurrent protection circuit (M38000TL2-PSW)
• User's manual

Specifications

* 1. Within MCU specifications
* 2. High-speed mode : f(ø)=f(Xin)/2
* M38000TL2-FPD is a product which got the declaration of conformity for EMC and safety standards (for Europe and the U.S.). To use M38000TL2-FPD outside Japan, be sure to use the emulator which got the declaration of conformity for EMC and safety standards.