Japan English
M37641T2-RPD-E (Discontinued product)
The following page content corresponds to the products marketed in Japan.
If you do not live in Japan, please
- Overview
- Documentation
- Design Support
Target Devices
- 740 Family 7600 Series 7641, 7643 Group
Overview
This product is an emulation pod, which is a user-replaceable MCU-dependent
hardwear tool for the PC4701 emulator. Connecting this emulation pod to a
PC4701 emulator allows you to configure a debugging environment for your target
system.
Components
- M37641T2-RPD-E emulation pod
- Evaluation MCU (M37641M8-XXXFS) * Already mounted
- Evaluation MCU (M37643M8-XXXFS)
- Oscillator circuit (XIN=24MHz, OSC-3) * Already mounted
- Oscillator circuit (XCIN=32.768kHz, OSC-2) * Already mounted
- Oscillator circuit (OSC-2)
- 100-wire flexible cable (FLX100)
- 120-wire flexible cable (FLX120-RPD)
- Converter for connecting FLX100 to 80-pin 0.8mm-pitch LCC [80D0] (M3T-FLX-80LCC)
- 80-pin 0.8mm-pitch IC socket made by Yamaichi Electronics Co., Ltd. (IC61-080-081)
- User´s manual
Specifications
| Applicable emulator | PC4701 |
| Supported MCU | 7600 Series 7641, 7643 Group |
| Maximum operating clock frequency | 24MHz (Ø = 12MHz, Vcc = 4.5 to 5.25V, 0 wait) 24MHz (Ø = 6MHz, Vcc = 3.0 to 3.6V, 0 wait) |
| MCU mode | Single-chip mode, Memory expansion mode, Microprocessor mode |
| Target system voltage | 3.0 to 3.6V, 4.5 to 5.25V |
| Power supply | Supplied from the emulator(DC) |
| Overseas standards | US EMI Standards (FCC part 15 Class A), CE marking (EN55022, EN52024) |
Connection to Target System
