E100

Basic System Configuration

E100 emulator system is composed of the products below. E100 MCU Unit (varying depending on target MCUs.) Converter Board (varying depending on target MCUs.) We also offer bundled packages for sale.

Target Devices/ Product Lineups

• RX Family
  • RX600 Series
• R8C Family
  • R8C/5x Series
  • R8C/3x Series
• Others
  • M16C Family
  • H8SX Family
  • H8S Family
  • R-Secure

* The present users of these models can continually receive our support service.
* As for the list of previous codes corresponding to current codes, see here. > "Renesas Microcomputer General Catalog" > "Package Code and Size Table"

Notes:
1. Two sets of R0E001000FLX00 are necessary to expand I/F cables.
2. It is necessary for external trigger event and for obtaining trace data of external signals.
3. It is used to measure the signals of individual pins.

Notes:
1. One set of R0E001000FLX00 is necessary to expand I/F cables.
2. It is necessary for external trigger event and for obtaining trace data of external signals.
3. It is used to measure the signals of individual pins.

Notes:
1. Two sets of R0E001000FLX00 are necessary to expand I/F cables.
2. It is necessary for external trigger event and for obtaining trace data of external signals.
3. It is used to measure the signals of individual pins.
4. While some functions are not supported, they can be debugged using the E100 emulator for M16C/64A and M16C/65 Groups. Click here for inquiries regarding the function limitations.

Notes:
1. Two sets of R0E001000FLX00 are necessary to expand I/F cables.
2. It is necessary for external trigger event and for obtaining trace data of external signals.
3. It is used to measure the signals of individual pins.

Notes:
1. Two sets of R0E001000FLX00 are necessary to expand I/F cables.
2. It is necessary for external trigger event and for obtaining trace data of external signals.
3. It is used to measure the signals of individual pins.

** : Scheduled to be supported