Skip to main content

The following page content corresponds to the products marketed in Japan.
If you do not live in Japan, please

 

Performance Outline of M16C/62A Group (100-Pin Version)

Item Performance
CPU Basic Instructions 91 instructions
Minimum Instruction
Execution Time
  • 62.5ns (f(XIN)=16MHz, VCC=5V)
  • 100ns (f(XIN)=10MHz, VCC=3V, with software one-wait) *
    * Mask ROM, Flash Memory 5V Version
Operating Mode
  • Single-chip mode
  • Memory expansion mode
  • Microprocessor mode
Address Space 1 Mbytes
Memory Capacity
  • See Product Lineup.
    • Peripheral
    Functions    		 Port
    • I/O port: 87 pins
    • Input port: 1 pin
    Multifunction Timer
    • Timer A: 16 bits × 5 channels
    • Timer B: 16 bits × 6 channels
    Serial Interface
    3 channels
    • Clock synchronous serial interface, clock asynchronous serial interface
    2 channels
    • Clock synchronous serial interface
    A/D Converter 10-bit A/D converter: 1 circuit, (8+2) input channels
    D/A Converter 8 bits × 2 channels
    DMAC 2 channels
    CRC Calculation
    Circuit    		 CRC-CCITT
    Watchdog Timer 15 bits × 1 channel (with prescaler)
    Interrupt
    • Internal: 25 factors
    • External: 8 factors
    • Software: 4 factors
    • Priority level: 7 levels
    Clock Generation
    Circuit
    • 2 circuits
      • Main clock generation circuit *
      • Sub clock generation circuit *
        * Equipped with a built-in feedback resistor. Ceramic resonator or crystal oscillator must be connected externally.
    Electrical
    Characteristics    		 Supply Voltage
    • 4.2 to 5.5V (f(XIN)=16MHz, without software wait) *
    • 2.7 to 5.5V (f(XIN)=10MHz, with software one-wait) *
      * Mask ROM, Flash Memory 5V Version
    Power Consumption 25.5mW (f(XIN)=10MHz, VCC=3V, with software one-wait)
    Flash Memory Program/Erase
    Supply Voltage    		 VCC=4.2 to 5.5V
    Program/Erase
    Endurance    		 100 times (all space)
    Operating Ambient Temperature -40 to 85 degrees C
    Package 100-pin plastic mold QFP/LQFP
    Back To Top

    Performance Outline of M16C/62A Group (80-Pin Version)

    Item Performance
    CPU Basic Instructions 91 instructions
    Minimum Instruction
    Execution Time
    • 62.5ns (f(XIN)=16MHz, VCC=5V)
    • 100ns (f(XIN)=10MHz, VCC=3V, with software one-wait) *
      * Mask ROM, Flash Memory 5V Version
    Operating Mode Single-chip mode
    Address Space 1 Mbytes
    Memory Capacity
  • See Product Lineup.
    		•
    Peripheral
    Functions    		 Port
    • I/O port: 70 pins
    • Input port: 1 pin
    Multifunction Timer
    • Timer A: 16 bits × 5 channels
    • Timer B: 16 bits × 6 channels
    Serial Interface
    2 channels
    • Clock synchronous serial interface, clock asynchronous serial interface
    1 channel
    • Clock asynchronous serial interface
    2 channels
    • Clock synchronous serial interface (1 channel is output only.)
    A/D Converter 10-bit A/D converter: 1 circuit, (8+2) input channels
    D/A Converter 8 bits × 2 channels
    DMAC 2 channels
    CRC Calculation
    Circuit    		 CRC-CCITT
    Watchdog Timer 15 bits × 1 channel (with prescaler)
    Interrupt
    • Internal: 25 factors
    • External: 5 factors
    • Software: 4 factors
    • Priority level: 7 levels
    Clock Generation
    Circuit
    • 2 circuits
      • Main clock generation circuit*
      • Sub clock generation circuit *
        * Equipped with a built-in feedback resistor. Ceramic resonator or crystal oscillator must be connected externally.
    Electrical
    Characteristics    		 Supply Voltage
    • 4.2 to 5.5V (f(XIN)=16MHz, without software wait) *
    • 2.7 to 5.5V (f(XIN)=10MHz, with software one-wait) *
      * Mask ROM, Flash Memory 5V Version
    Power
    Consumption    		 25.5mW (f(XIN)=10MHz, VCC=3V, with software one-wait)
    Flash Memory Program/Erase
    Supply Voltage    		 VCC=4.2 to 5.5V
    Program/Erase
    Endurance    		 100 times (all space)
    Operating Ambient Temperature −40 to 85 degrees C
    Package 80-pin plastic mold QFP
    Back To Top

     

     

    Performance Outline of M16C/62A Group (M16C/62T) (100-Pin Version)

    Item Performance
    CPU Basic Instructions 91 instructions
    Minimum Instruction
    Execution Time    		 62.5ns (f(XIN)=16MHz, VCC=5V)
    Operating Mode Single-chip mode
    Address Space 1 Mbytes
    Memory Capacity
  • See Product Lineup.
    		•
    Peripheral
    Functions    		 Port
    • I/O port: 87 pins
    • Input port: 1 pin
    Multifunction
    Timer
    • Timer A: 16 bits × 5 channels
    • Timer B: 16 bits × 6 channels
    Serial Interface
    3 channels
    • Clock synchronous serial interface, clock asynchronous serial interface
    2 channels
    • Clock synchronous serial interface
    A/D Converter 10-bit A/D converter: 1 circuit, (8×3+2) input channels
    D/A Converter 8 bits × 2 channels
    DMAC 2 channels
    CRC
    Calculation
    Circuit    		 CRC-CCITT
    Watchdog
    Timer    		 15 bits × 1 channel (with prescaler)
    Interrupt
    • Internal: 25 factors
    • External: 8 factors
    • Software: 4 factors
    • Priority level: 7 levels
    Clock Generation
    Circuit
    • 2 circuits
      • Main clock generation circuit *
      • Sub clock generation circuit *
        * Equipped with a built-in feedback resistor. Ceramic resonator or crystal oscillator must be connected externally.
    Electrical
    Characteristics    		 Supply Voltage
    • 4.2 to 5.5V (f(XIN)=16MHz, without software wait): Mask ROM Version
    • 4.5 to 5.5V (f(XIN)=16MHz, without software wait): One-Time PROM Version
    Power
    Consumption    		 140mW (VCC=5V, f(XIN)=16MHz)
    Flash Memory Program/Erase
    Supply Voltage    		 VCC=4.2 to 5.5V
    Program/Erase
    Endurance    		 100 times (all space)
    Operating Ambient Temperature
    • -40 to 85 degrees C: 85 degrees C Guaranteed Version
    • -40 to 125 degrees C: 125 degrees C Guaranteed Version
    Package 100-pin plastic mold QFP
    Back To Top

     

     

    Performance Outline of M16C/62A Group (M16C/62T) (80-Pin Version)

    Item Performance
    CPU Basic Instructions 91 instructions
    Minimum Instruction
    Execution Time    		 62.5ns (f(XIN)=16MHz, VCC=5V)
    Operating Mode Single-chip mode
    Address Space 1 Mbytes
    Memory Capacity
  • See Product Lineup.
    		•
    Peripheral
    Functions    		 Port
    • I/O port: 70 pins
    • Input port: 1 pin
    Multifunction
    Timer
    • Timer A: 16 bits × 5 channels
    • Timer B: 16 bits × 6 channels
    Serial Interface
    2 channels
    • Clock synchronous serial interface, clock asynchronous serial interface
    1 channel
    • Clock asynchronous serial interface
    2 channels
    • Clock synchronous serial interface
    A/D Converter 10-bit A/D converter: 1 circuit, (8×3+2) input channels
    D/A Converter 8 bits × 2 channels
    DMAC 2 channels
    CRC
    Calculation
    Circuit    		 CRC-CCITT
    Watchdog
    Timer    		 15 bits × 1 channel (with prescaler)
    Interrupt
    • Internal: 25 factors
    • External: 5 factors
    • Software: 4 factors
    • Priority level: 7 levels
    Clock Generation
    Circuit
    • 2 circuits
      • Main clock generation circuit *
      • Sub clock generation circuit *
        * Equipped with a built-in feedback resistor. Ceramic resonator or crystal oscillator must be connected externally.
    Electrical
    Characteristics    		 Supply Voltage
    • 4.2 to 5.5V(f(XIN)=16MHz, without software wait): Mask ROM Version
    • 4.5 to 5.5V(f(XIN)=16MHz, without software wait): One-Time PROM Version
    Power
    Consumption    		 140mW (VCC=5V, f(XIN)=16MHz)
    Flash Memory Program/Erase
    Supply Voltage
    VCC=4.2 to 5.5V
    Program/Erase
    Endurance    		 100 times (all space)
    Operating Ambient Temperature
    • -40 to 85 degrees C: 85 degrees C Guaranteed Version
    • -40 to 125 degrees C: 125 degrees C Guaranteed Version
    Package 80-pin plastic mold QFP
    Back To Top

     

     

    Performance Outline of M16C/62M Group (100-Pin Version)

    Item Performance
    CPU Basic Instructions 91 instructions
    Minimum Instruction
    Execution Time
    • 100ns (f(XIN)=10MHz, VCC=2.7 to 3.6V)
    • 142.9ns (f(XIN)=7MHz, VCC=2.2 to 3.6V, with software one-wait)
    Operating Mode
    • Single-chip mode
    • Memory expansion mode
    • Microprocessor mode
    Address Space 1 Mbytes
    Memory Capacity
  • See Product Lineup.
    		•
    Peripheral
    Functions    		 Port
    • I/O port: 87 pins
    • Input port: 1 pin
    Multifunction
    Timer
    • Timer A: 16 bits × 5 channels
    • Timer B: 16 bits × 6 channels
    Serial Interface
    3 channels
    • Clock synchronous serial interface, clock asynchronous serial interface
    2 channels
    • Clock synchronous serial interface
    A/D Converter 10-bit A/D converter: 1 circuit, (8+2) input channels
    D/A Converter 8 bits × 2 channels
    DMAC 2 channels
    CRC
    Calculation
    Circuit    		 CRC-CCITT
    Watchdog
    Timer    		 15 bits × 1 channel (with prescaler)
    Interrupt
    • Internal: 25 factors
    • External: 8 factors,
    • Software: 4 factors
    • Priority level: 7 levels
    Clock Generation
    Circuit
    • 2 circuits
      • Main clock generation circuit *
      • Sub clock generation circuit *
        * Equipped with a built-in feedback resistor. Ceramic resonator or crystal oscillator must be connected externally.
    Electrical
    Characteristics    		 Supply Voltage
    • 2.7 to 3.6V (f(XIN)=10MHz, without software wait)
    • 2.4 to 2.7V (f(XIN)=7MHz, without software wait)
    • 2.2 to 2.4V (f(XIN)=7MHz, with software one-wait)
    Power
    Consumption    		 28.5mW (f(XIN)=10MHz, VCC=3V, without software wait)
    Flash Memory Program/Erase
    Supply Voltage    		 VCC=2.7 to 3.6V
    Program/Erase
    Endurance    		 100 times (all space)
    Operating Ambient Temperature -40 to 85 degrees C
    Package 100-pin plastic mold QFP/LQFP
    Back To Top

     

     

    Performance Outline of M16C/62M Group (80-Pin Version)

    Item Performance
    CPU Basic Instructions 91 instructions
    Minimum Instruction
    Execution Time
    • 100ns (f(XIN)=10MHz, VCC=2.7 to 3.6V)
    • 142.9ns (f(XIN)=7MHz, VCC=2.2 to 3.6V, with software one-wait)
    Operating Mode Single-chip mode
    Address Space 1 Mbytes
    Memory Capacity
  • See Product Lineup.
    		•
    Peripheral
    Functions    		 Port
    • I/O port: 70 pins
    • Input port: 1 pin
    Multifunction
    Timer
    • Timer A: 16 bits × 5 channels
    • Timer B: 16 bits × 6 channels
    Serial Interface
    2 channels
    • Clock synchronous serial interface, clock asynchronous serial interface
    1 channel
    • Clock asynchronous serial interface
    2 channels
    • Clock synchronous serial interface (1 channel is output only.)
    A/D Converter 10-bit A/D converter: 1 circuit, (8+2) input channels
    D/A Converter 8 bits × 2 channels
    DMAC 2 channels
    CRC
    Calculation
    Circuit    		 CRC-CCITT
    Watchdog
    Timer    		 15 bits × 1 channel (with prescaler)
    Interrupt
    • Internal: 25 factors
    • External: 5 factors
    • Software: 4 factors
    • Priority level: 7 levels
    Clock Generation
    Circuit
    • 2 circuits
      • Main clock generation circuit *
      • Sub clock generation circuit *
        * Equipped with a built-in feedback resistor. Ceramic resonator or crystal oscillator must be connected externally.
    Electrical
    Characteristics    		 Supply Voltage
    • 2.7 to 3.6V (f(XIN)=10MHz, without software wait)
    • 2.4 to 2.7V (f(XIN)=7MHz, without software wait)
    • 2.2 to 2.4V (f(XIN)=7MHz, with software one-wait)
    Power
    Consumption    		 28.5mW (f(XIN)=10MHz, VCC=3V, without software wait)
    Flash Memory Program/Erase
    Supply Voltage    		 VCC=2.7 to 3.6V
    Program/Erase
    Endurance    		 100 times (all space)
    Operating Ambient Temperature -40 to 85 degrees C
    Package 80-pin plastic mold QFP
    Back To Top

    End of content

    Back To Top