Package Information
| CAD Model: | View CAD Model |
| Pkg. Type: | WLCSP-28 |
| Pkg. Code: | |
| Lead Count (#): | 28 |
| Pkg. Dimensions (mm): | 2.98 x 1.69 mm |
| Pitch (mm): | 0.4 |
Environmental & Export Classifications
| Moisture Sensitivity Level (MSL) | 1 |
| Pb (Lead) Free | Yes |
| ECCN (US) | |
| HTS (US) |
Product Attributes
| Lead Count (#) | 28 |
| Carrier Type | Tape & Reel |
| Moisture Sensitivity Level (MSL) | 1 |
| Pb (Lead) Free | Yes |
| Temp. Range (°C) | -40 to +85°C |
| Country of Assembly | TAIWAN |
| Country of Wafer Fabrication | TAIWAN |
| Current Monitor Output | No |
| Discharge Circuit | No |
| Enable | OUT: Active Low SYS: Active High |
| FET Pass Device Type | Power Splitter |
| IDS (A) | 6 |
| IDS Channel 1 (A) | 6 |
| IDS Channel 2 (A) | 6 |
| Internal TVS Surge Protection | Yes |
| MOQ | 3000 |
| Output Discharge Circuit | No |
| Output Voltage Slew Rate set by | No |
| Over Current Protection (OCP) | No |
| Over Temperature Protection (OTP) | No |
| Over Voltage Protection | Yes |
| Parametric Category | Load Switches |
| Pitch (mm) | 0.4 |
| Pkg. Dimensions (mm) | 2.98 x 1.69 mm |
| Pkg. Type | WLCSP-28 |
| Power Good (PG), FAULT indicator | OUT: No SYS: PG |
| Power Monitor Output | No |
| Price (USD) | $0.79175 |
| Qty. per Reel (#) | 3000 |
| RDSON (Typ) (mΩ) | 12 |
| RDSON (Typ) Channel 1 (mΩ) | 12 |
| RDSON (Typ) Channel 2 (mΩ) | 24 |
| Reverse current blocking | No |
| Reverse voltage detection | No |
| Short Circuit Protection | No |
| Switch Type | Single Input - Dual Output, Reverse Blocking |
| Undervoltage Protection | Yes |
| VD/VIN (Max) | 13 |
| VD/VIN (Min) | 2.7 |
| VIN Channel 1 max. (V) | 13.3 |
| VIN Channel 1 min. (V) | 2.7 |
| VIN Channel 2 max. (V) | 4.9 |
| VIN Channel 2 min. (V) | 2.7 |
| VIN Range (V) | 2.7 - 13.3 |
| VIN Range Channel 1 (V) | 2.7 - 13.3 |
| VIN Range Channel 2 (V) | 2.7 - 4.9 |
| VIN max. (V) | V13.3 |
| VIN min. (V) | V2.7 |
| VOUT Discharge Circuit | No |
Resources for SLG59H1302C
Description
The SLG59H1302C is a 130V surge‑protected, 28V tolerant power splitter with two high‑current switches and a 0.1A capable LDO in a 28‑ball WLCSP. With independent control for each channel, the SLG59H1302C contains a 6A capable, 12mΩ nFET switch for the BUS‑to‑OUT path and a reverse‑blocking 6A capable, 24mΩ nFET switch for the BUS‑to‑SYS path. An internal, “Always On” LDO is 0.1A capable and can be used to supply power to downstream devices when the BUS terminal voltage is higher than 2.7V. When the SYS terminal turns on, the IC’s push‑pull PG output becomes asserted. The SLG59H1302C is fully specified over the industrial -40 °C to 85 °C temperature range.