Pitch (mm) | 0.8 |
Lead Count (#) | 64 |
Pkg. Type | LQFP |
Pkg. Dimensions (mm) | 14 x 14 x 1.7 |
Pkg. Code | pkg_8426 |
Moisture Sensitivity Level (MSL) | 3 |
ECCN | 3A991 |
RoHS (R5F52105BDFK#10) | EnglishJapanese |
Pb (Lead) Free | Yes |
HTSUS |
Carrier Type | Full Carton (Tray) |
Family Name | RX |
Series Name | RX200 |
Group Name | RX210 |
CPU Architecture | RX |
Main CPU | RXv1 |
Sub CPU | No |
Floating Point Unit | No |
Bit Length | 32 |
Program Memory (KB) | 128 |
Data Flash (KB) | 8 |
RAM (KB) | 20 |
ECC SRAM | No |
Lead Count (#) | 64 |
Pkg. Type | LQFP |
Pitch (mm) | 0.8 |
Pkg. Dimensions (mm) | 14 x 14 x 1.7 |
Number of Supply Voltage(s) (#) | 1 |
Supply Voltage (V) | 1.62 - 5.5 |
I/O Ports | 49 |
DMAC or DTC | DMAC&DTC |
DMA (ch) | 4 |
Temperature Sensor (ch) (#) | 1 |
Power-On Reset | Yes |
Watchdog Timer (ch) | 2 |
External Memory Bus (bit) | No |
DRAM I/F | No |
3D GPU | No |
Accelerator | No |
Temp. Range | Ta = -40 to +85°C |
External Interrupt Pins (#) | 7 |
LVD or PVD | Yes |
Operating Freq (Max) (MHz) | 50 |
Operating Freq of Sub CPU (Max) | 0 |
Sub-clock (32.768 kHz) | Yes |
On-chip Oscillator | Yes |
Ethernet speed | No |
Ethernet (ch) | 0 |
EtherCat (ch) (#) | 0 |
USB Ports (#) | 0 |
USB FS (host ch/device ch) | ( 0 / 0 ) |
USB HS (host ch/device ch) | ( 0 / 0 ) |
USB SS (host ch/device ch) | ( 0 / 0 ) |
PCI Express (generation and ch) | No |
SCI or UART (ch) | 6 |
SPI (ch) | 7 |
QSPI (ch) | 0 |
OSPI (ch) | 0 |
I2C (#) | 7 |
I3C (ch) | 0 |
CAN (ch) | 0 |
CAN-FD (ch) | 0 |
Wireless | No |
IrDA | No |
LIN (#) | 0 |
SDHI (ch) | 0 |
High Resolution Output Timer | No |
PWM Output (pin#) | 16 |
32-Bit Timer (ch) | 0 |
16-Bit Timer (ch) (#) | 10 |
8-Bit Timer (ch) | 4 |
Standby operable timer | No |
Asynchronous General Purpose Timer / Interval Timer (ch) | 0 |
RTC | Yes |
16-Bit A/D Converter (ch) | 0 |
14-Bit A/D Converter (ch) | 0 |
12-Bit A/D Converter (ch) | 12 |
10-Bit A/D Converter (ch) | 0 |
24-Bit Sigma-Delta A/D Converter (ch) | 0 |
16-Bit D/A Converter (ch) | 0 |
12-Bit D/A Converter (ch) | 0 |
10-Bit D/A Converter (ch) (#) | 2 |
8-Bit D/A Converter (ch) | 0 |
Analog Comparator (ch) | 4 |
OPAMP (ch) (#) | 0 |
PGA (ch) | 0 |
Capacitive Touch Sensing Unit (ch) | 0 |
Graphics LCD Controller | No |
MIPI Interfaces (DSI) (ch) | 0 |
MIPI Interfaces (CSI) (ch) | 0 |
Camera I/F (Parallel) | No |
Image Codec | No |
2D Drawing Engine | No |
Segment LCD Controller | No |
SSI (ch) | 0 |
Security & Encryption | No |
Debug Interface | Single-wire Serial |
Moisture Sensitivity Level (MSL) | 3 |
12-Bit Timer (ch) | 0 |
32-Bit High Res Timer (ch) | 0 |
ADC | 12-bit x 12-ch |
Asynchronous General Purpose Timer (ch) | 0 |
Bit Size | 32 |
CPU | RXv1 |
DAC | 10-bit x 2-ch |
DMA | Yes |
DTC (ch) | 0 |
Delta-Sigma A/D Converter | No |
Ethernet | No |
High-Speed Analog Comparator (ch) | 0 |
Lead Compliant | Yes |
Length (mm) | 14 |
Low-Power Analog Comparator (ch) | 0 |
MIPI Interfaces (DSI/CSI) | 0 |
MOQ | 720 |
Pb (Lead) Free | Yes |
SPI (#) | 7 |
Tape & Reel | No |
Thickness (mm) | 1.7 |
Timer | 8-bit x 4-ch, 16-bit x 10-ch |
UART (#) | 6 |
USBFS (ch) | 0 |
USBHS (ch) | 0 |
Width (mm) | 14 |
The RX210 Group has a wide operating voltage range of 1.62 V to 5.5 V and can execute calculations at 78 DMIPS (Dhrystone million instructions per second) at up to 50 MHz high-speed operation. Furthermore, it achieves 0.2 mA/MHz low power performance when operating at 50 MHz. Consumption current in deep software standby mode is a mere 0.45 µA. A wide lineup of 48 KB to 1 MB ROM and 48-pin to 145-pin products is available.